TFTP ERROR FILE NOT FOUND
@Trep76470 A windows dhcp server should work just fine. Is it OK to guess that your fog server is at ip address 192.168.21.220? The error message you first posted usually indicate a bios computer...
View ArticleBest way to get to Fog 1.5.10.5 Ubuntu 22.04
Thanks for the advice. Ran into a speed bump along the way. When I was doing step 3 I got an error about PHP 7.4. I upgraded to PHP8.1 and then was able to install the upgrade for Fog. After that I did...
View ArticleDHCP failed: no configuration method succeeded - after automatic reboot
@george1421 Yes it is. Both, the fog server and the host device, are in VirtualBox - and i get the error message. But tbh if the problem doesn’t show up when deploying the whole system in my network, i...
View ArticleUEFI: NBP downloaded successfully - then blackscreen
@george1421 @Tom-Elliott Luckily I could schedule a meeting with my System-Admin today, and he tried turning off the serving of the WDS boot file - seems in the configuration of option 66 and 67 of our...
View ArticleBootable ISO or IMG for a computer with no working network adapter
@jptechnical If the laptop is in uefi mode there is a way to boot from a usb drive: https://forums.fogproject.org/topic/6350/usb-boot-uefi-client-into-fog-menu-easy-way There are other options but try...
View ArticleMultiple entrries in boot menu from BIOS
Hello, You can also have a look at this topic : https://forums.fogproject.org/topic/16876/dual-boot-grub-issue-after-deploying?_=1696487644593
View Articlemultiple locations with fog servers
@Tom-Elliott Is there a way to check the synchronization status of the storage nodes with the master node on the webpage?
View ArticleConfigure FOG Server's DHCP service?
@introloud said in Configure FOG Server's DHCP service?: I’m gonna try both unicast and multicast to a couple of machines first but I doubt that it’d be any different since it’s on a simple network...
View ArticleNo deja subir ni clonar imágenes de procesador de generación 10
@Eliza In the FOG web user interface. In the FOG menu FOG Configuration and then along the left menu Select Kernel update.
View ArticleTips for reducing image size?
@Sebastian-Roth Thanks. Worked like a charm. Went from ~250Gb image down to ~9Gb.
View ArticleClik here to view.
Two VLANs (Two IP ranges)
Two VLANs (Two IP ranges) Hello everybody. I have a doubt. How do I make fog work on 2 different vlans? I have pfSense as firewall and dhcp. And I have two vlans that must be separated for security...
View ArticleDeploying ChromeOS Flex to Legacy Systems
My current district is attempting to move away from Windows to ChromeOS Flex for some devices. So far it works great when USB installed on a legacy device, but we’re eventually looking to install it to...
View ArticleNew FOG Server, PartedMagic Issue, Error 0x2a818006
Hi there. I’ve just inherited the network in my company and am coming from pretty much zero network experience, especially with Linux and FOG. Our current FOG server is running on Ubuntu 11 and FOG 0.3...
View ArticleNew Tutorial for Windows 11/FOG/Autopilot/Driver...
Hi All, I recently got a FOG environment set up, but it was a huge pain. The documentation is all over the place, and often very outdated, but we got it done. I have a W11 image that I captured, and...
View ArticleDisk naming/ Exclude USB from image deployment
@Tom-Elliott Thanks, for all the input. I’ll see if i can find some sensible solution for my setup.
View Articlecasting across VLANs
@AdKlSc There was an issue with the FOG Project web site in 2018 or 2019 where we lost all uploaded images. Unfortunately I see that post lost it images. Are you having a specific problem following the...
View ArticleInvalid Token.dat with Deep Freeze
Hello everyone, I would also pay for the effort if one of you sent me a script that I could run via crontab. Thanks
View ArticleProblem Capturing right Host Primary Disk with INTEL VROC RAID1
@Ceregon said in Problem Capturing right Host Primary Disk with INTEL VROC RAID1: Maybe i can work with groups of hosts to decide when this postinit script is used It is possible to access FOG system...
View ArticleCannot PXE boot on Client PCs
@zguo said in Cannot PXE boot on Client PCs: Not sure why it shows 172.20.4.1. I guess maybe because the client PC cannot find the server, then it goes to the default gateway? Then back to the...
View ArticleAdd node storage on the fog master server.
@Tom-Elliott No, the node points to the master configurations. installtype=‘S’ snmysqluser=‘fogstorage’ snmysqlpass=‘password’ snmysqlhost=‘ip_master’ using the fogproject/bin/installfog.sh Checking if...
View ArticleNFS Config
@bkgoodman This can be set from the fog web ui. FOG has a concept of storage nodes and master nodes. Only master nodes can collect images, you can deploy images from both master nodes and storage...
View ArticleVulnerability discovery
Hello, I sent a mail to contact@fogproject.org 2 days ago about a vulnerability quite important in the project. Is this mailbox still in use and have members of staff been able to read my mail? Thanks!
View ArticleFog server virtualbox ubuntu setup
hello, so i want to setup my virtualbox with fog server which is running with ubuntu . i got a switch but i dont know which ip address i have to setup on fog server to run,i tried different time but in...
View ArticleAlmaLinux 8.9 NetInstall or ISO
Re: AlmaLinux 8.9 NetInstall or ISO I ended up piggy backing the ipxe setup from fogproject and loading netboot.xyz which is doing the trick. Thank you.
View ArticleExisting iPXE-Environment -- no chaining possible to fogserver?
Hello friends of FOG! I have a functioning iPXE-Environment. Via http (Tiny PXE Server) I can chain to a WDS for deploying windows images. I also can boot into various linux systems. Now I have a...
View Article
